The water from my bathroom tap comes out at an angle (as though I had my finger over the stream). The direction of the water changes as I turn the tap. It also makes squealing noises and sometimes sputters, making loud knocking noises when it does.

It behaves better if I run the shower at the same time. If I tighten it shut really hard, sometimes it will return to normal for a bit. I mostly stopped doing that though cos the seal broke and had to be replaced.

What’s wrong with it and how hard is it to fix? I have zero plumbing experience.

  • Schwim Dandy@piefed.zip
    link
    fedilink
    English
    arrow-up
    3
    ·
    25 days ago

    A photo or video would be very helpful, vid moreso since we could hear the whistle and sputter.

    The only faucets I’ve ever seen without an aerator are the basin farm-style spigots that have become a recent fad. All others should have one equipped when sold. That’s an important distinction to make because many people remove them without replacing them, usually due to poor pressure or not wanting to be bothered to go buy another one. Your faucet could be missing one for that reason.

    • pottery@feddit.ukOP
      link
      fedilink
      English
      arrow-up
      3
      ·
      edit-2
      25 days ago

      Added a picture of the tap. May get round to a video (can’t do it now)

      The bathroom tap downstairs clearly has an aerator, but it’s a completely different model.

      • Schwim Dandy@piefed.zip
        link
        fedilink
        English
        arrow-up
        2
        ·
        25 days ago

        That style(Victorian) does not have an aerator in the spigot itself, so we can rule that part out.

        You can, however still have a screen in the connectors of the supply lines.

        Does it only happen on your cold tap on that sink or does the hot behave oddly as well?

        That tap is very easy to rebuild. My guess at this point is that you have some corrosion or deposits in the faucet causing the behavior. If snaking something like a zip tie or wire into the mouth doesn’t result in removal of anything, I’d consider pulling the tap apart(after shutting the water off and releasing the pressure). There’s really only a couple rubber seals in it that are the consumables, the rest should be able to be reused after cleaning.

        • pottery@feddit.ukOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          25 days ago

          Only on the cold, though I almost never use the hot.

          I’ll look at finding a wire or sth. I reckon I can take it from here. Thanks for your help.