• TorJansen@sh.itjust.worksB
    link
    fedilink
    English
    arrow-up
    1
    ·
    11 个月前

    An HP by any chance? These don’t handle suspend well and you need to add a parameter or three at boot via grub (or systemd too). Otherwise the system gets tied up filling the log endlessly with rapidly cycling pcie errors and you end up crashing or frozen pretty quickly. If this might be your problem, see

    https://askubuntu.com/questions/863150/pcie-bus-error-severity-corrected-type-physical-layer-id-00e5receiver-id

    And

    https://www.reddit.com/r/pop_os/comments/yh3nkw/freezing_issue_finally_solved_here_is_how/

    Where there’s a problem there’s usually a solution, you just might need to root around the web for answers.

    • KneeTitts@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      arrow-down
      2
      ·
      11 个月前

      Where there’s a problem there’s usually a solution, you just might need to root around the web for answers.

      Thats a huge problem for linux, average users are never going to do that. But as a long time linux user myself I have been trying to find solution to the suspend problem for a long time and I still cant find one. So Id say its a big problem.

      • TorJansen@sh.itjust.worksB
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        11 个月前

        Linux programmers have been battling Microsoft and its shady deals with hardware vendors for decades. That’s the real problem. Just when something starts working too well, MS changes things up, dictates changes to hardware, and then that breaks it for Linux, so it’s back to the old IDE with new hardware to figure out how to get around it. Or the hardware folk just don’t consider Linux a viable alternative and just happily make sure only Winders runs well.