I searched for the engine briefly, and found no mention of anyone thinking of this.
This post comes from this comment of mine.
In my original comment, I note that I immediately think the strain would blow the entire thing a part.
What are your reasons of why you think would not work, or why no one has tried, or maybe you know someone who did try?
Note, Not the size of a car. More like the size of a cargo ships diesel engine. (“Wärtsilä-Sulzer RTA96-C” as an example)
Imagined design. Original Post
I don’t imagine it being the size of a car?
I imagine it being a huge facility, with a steam generator attached utilizing the coolant heat and more.
The pistons would be similar in size to the pistons of a diesel ship.
Take the “Wärtsilä-Sulzer RTA96-C” as example.
So you mean more like a power plant? Are you thinking like brayton cycle, rankine cycle, or both (combined cycle)?
I don’t know much about fusion, but a big part of how a brayton works at that scale is air. For a jet engine the combustion expands, spinning the turbine or afterwards, and this spins the axially connected compressor section which sucks and squeezes air prior to the combustion chamber. A piston engine would be less continuous, so might be better suited? But in any case, this relies on whether fusion moves a shitload of air like a combustion engine does, (and like I said idk if it does,) and if it does then I guess it could be possible so long as pressures and temperatures stayed within metallurgical limits. I also don’t know how economical it could be, but let’s pretend that this is entirely exploratory and costs don’t matter. I’m not gonna shit on your idea because the truth is that I don’t know and you could be predicting a breakthrough idea 100 or 50 or 20 years ahead. Is fusion something that can quickly explode like in a piston engine in the first place or would it be better to run continuously through a turbine? Is that even possible? Idk.
Regarding the rankine cycle, that’s the assumed application of fusion power. It’s just the newest, best idea for how to boil water to superheated steam to spin turbines and condense back to feedwater. I only even bring this up because you specifically mentioned a steam generator, and that really only makes sense if you’re utilizing the rankine cycle. Combined cycle would be using that piston/turbine engine thing from earlier but recycle the exhaust heat to a HRSG which loops to a steam turbine and condenser and back. But you need a large volume of fairly continuous hot exhaust flow for this, so it’s wholly dependent on that thing I said I don’t know lol.
We need some input from people who know something about fusion. I don’t really know how we would control fusion while throwing a shitload of air into it and getting an even bigger shitload of air out the other end. Without that input, idk how anything other than rankine could be managed.