The Picard Maneuver@piefed.world to memes@lemmy.worldEnglish · 14 days agoWhere it all beganimagemessage-square51linkfedilinkarrow-up1451arrow-down111
arrow-up1440arrow-down1imageWhere it all beganThe Picard Maneuver@piefed.world to memes@lemmy.worldEnglish · 14 days agomessage-square51linkfedilink
minus-squarebss03@infosec.publinkfedilinkEnglisharrow-up2·14 days agoIIRC, the 2600 didn’t have a graphics processor. So, you had to “chase the ray” with CPU instructions, which made for some interesting limitations.
minus-squareDefault Username@lemmy.dbzer0.comlinkfedilinkEnglisharrow-up4·14 days agoIt has the TIA, which is as close to a picture processor (and also audio synthesizer) as you can get, but due to the 128 bytes of RAM, there was not enough RAM to form a framebuffer, hence the need to race the beam.
minus-squarebss03@infosec.publinkfedilinkEnglisharrow-up2·13 days agoThanks for the clarification. I was too young to program the 2600. I started programming on PC-compatible.
IIRC, the 2600 didn’t have a graphics processor. So, you had to “chase the ray” with CPU instructions, which made for some interesting limitations.
It has the TIA, which is as close to a picture processor (and also audio synthesizer) as you can get, but due to the 128 bytes of RAM, there was not enough RAM to form a framebuffer, hence the need to race the beam.
Thanks for the clarification. I was too young to program the 2600. I started programming on PC-compatible.